How do I set up my M6s Router?

In this article, we'll show you how to quickly set up your new M6s Wi-Fi Router

Follow these steps to set up your Router

1. Plug in the M6s and connect the one end of the provided ethernet cable to the WAN port of the M6s, and the other end to the LAN port of your modem. Once connected via ethernet cable, the front LED on the M6s will light up and turn white after a few seconds, confirming a successful connection.

Notice:

The red light turns on to indicate that the device has started.

When the device starts successfully but there is no internet connection, the light will turn orange.

When the device has an internet connection, the light will turn white.

2. Use your mobile device or computer to search for and connect to the open MERCKU-XXXX WiFi network.

3. Use the Mercku App or Mercku Portal http://mywifi.mercku.tech  or http://192.168.127.1/  and follow the instructions to set up your SSID to complete the setup, plus manage your network!