How do I set up my M6s Nano Router?

In this article, we'll show you how to quickly set up your new M6s Nano Wi-Fi Router

Follow these steps to set up your Router

1. Plug the M6s Nano into the socket and connect the provided WAN cables in the port. Once done the Red light turns on indicating that the device has been powered on. As soon as the device has an internet connection, the light will turn white.

Notice:

The red light turns on to indicate that the device has started.

When the device starts successfully but there is no internet connection, the light will turn orange.

When the device has an internet connection, the light will turn white.

2. Use your mobile device or computer to search for and connect to the open MERCKU-XXXX WiFi network.

3. Use the Mercku App or Mercku Portal http://mywifi.mercku.tech  or http://192.168.127.1/  and follow the instructions to set up your SSID to complete the setup, plus manage your network!