We allow controlling the front LED status to avoid light disturbing your sleep.
Please note: this function is available for firmware versions over 1.9.2 on the Mercku M2 and M6.
Using the Mercku App:
- Open the Mercku App on your mobile device
- Select Settings > LED
- Press the toggle to enable LED, and select Turn off at to input the time the router LED turns off, and select Turn on at to input the time the router LED turns back on.
Using the Mercku Portal
- Visit http://mywifi.mercku.tech, and log in using your Router Admin Password
- Select Settings > LED
- Click the toggle to enable LED control, and set the time at which your router’s LED turns off, and set the time at which it turns back on.
Comments
0 comments
Article is closed for comments.