The M2 and M6 support router WAN MAC Clone feature. You will be able to modify the MAC address of the router WAN with this function on.
The management route is the same on both the Mercku M2 and the Mercku M6.
Cloning your MAC address can be completed through the Mercku App or Portal.
Using the Mercku App:
- Open the Mercku App on your mobile device
Settings > Advanced Settings > Clone MAC Address > Custom MAC
Using the Mercku Portal:
- Visit http://mywifi.mercku.tech, and log in using your Router Admin Password
Select Advanced Settings > Clone MAC Address
To clone your MAC address you must do the following:
Enable the “Clone MAC Address” and enter the custom MAC address of the device whose MAC address you want to be cloned.
Article is closed for comments.