Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is valid and supports a network. When WAN Ping is off, the public WAN IP address on the Mercku device will not respond to ping commands. This function is off by default and it is recommended to keep it off.
The management route is the same on both the Mercku M2 and the Mercku M6.
The firewall setting can be toggled on and off using the Mercku Portal.
- Visit http://mywifi.mercku.tech, and log in using your Router Admin Password
- Under Advanced Settings > Select Firewall > Click the slider beside WAN Ping to turn it on/off.
Comments
0 comments
Article is closed for comments.