How do I adjust the channel width?

Adjusting your channel width impacts the amount of bandwidth used during data transmission. Increasing the channel width generally leads to faster speeds but makes it more susceptible to interference.

The management route is the same on both the Mercku M2 and the Mercku M6.

You can adjust your Mercku network’s channel width to the following on each band:

• 4 GHz band: 20 MHz or 40 MHz
• 5 GHz band: 20 MHz, 40 MHz, or 80 MHz

Using the Mercku App or Portal, you can adjust your network’s channel widths.

Using the Mercku App:

1. Open the Mercku App on your mobile device
2. Select Settings> Select Wi-Fi Settings
3. Under “2.4G channel” and “5G channel”, you can select what width you would like your channel to use.
4. Select Done.

Using the Mercku Portal: 

1. Visit http://mywifi.mercku.tech, and log in using your Router Admin Password
2. Select Settings> Select Wi-Fi Settings
3. Under “2.4G channel” and “5G channel”, you can select what width you would like your channel to use.
4. Click Save.